Loading ...
Loading ...
The FiX™ 82 may be used to perform the following functions:
1. Eight differential-balanced inputs accept virtually any OEM analog audio
signal, from low-voltage, line-level to high power, amplified speaker-level,
and converts them to digital audio with 24-bit effective resolution.
2. Compatible with full-range and band-limited OEM signals, outputs from
factory 2-way, 3-way or 4-way stereo systems are automatically summed
into a complete, full-range stereo signal.
3. Factory filtered or “tuned” signals are automatically restored back to a flat,
full-range audio output. These digital-domain corrections can vary from
subtle to dramatic, depending on the amount of equalization engineered
into the factory audio system.
4. Time delayed OEM signals are automatically corrected into a
synchronized output.
5. A simple calibration process performs signal summing, EQ restoration and
time-delay correction tasks automatically.
6. Digitally corrected signals can then be sent to your aftermarket signal
processors or amplifiers via two methods:
• Analog audio through a stereo pair of low-distortion, 4-volt (RMS)
line-level outputs
• Digital audio through an optical (Toslink) output, supporting PCM
audio (S/PDIF) 24bit/48kHz
7. Differential-balanced input architecture ensures noise immunity and
compatibility with most analog output OEM source units or amplifiers.
8. Selectable turn-on options for activation include: conventional 12-volt
trigger, automatic via Signal-Sensing or automatic via DC Offset-Sensing.
9. Provides a dedicated remote turn-on voltage output for activating
aftermarket amplifiers or signal processors.
10. JLID Controller Port allows connection of the optional DRC-100 Digital
Remote Controller (sold separately), adding Master Volume Control,
Handsfree Optimization Mode and LED Status Reporting capabilities from
the driver’s seat.
11. USB port provides access to update firmware and advanced options.
The FiX™ 82 may be used as a standalone integration device, sending
crystal-clear audio to your amplifiers or as a gateway to world-class sound by
using it with our TwK™ System Tuning DSP (sold separately).
Planning Your Installation
It is important that you take the time to read this manual and that you plan
your installation carefully. It is very easy to damage expensive vehicle systems
in modern automobiles. Never assume that you have found appropriate wires
without consulting a reliable wiring diagram or without performing signal
testing with proper test equipment. If you are uncomfortable or unfamiliar with
reading diagrams or testing signals, please enlist the services of your authorized
JL Audio dealer to perform the installation.
Loading ...
Loading ...
Loading ...