Loading ...
Loading ...
Loading ...
10
4. Remove the upper hinge axis, transfer it to
reversed side and tighten securely, then put it in a
safe place.
5. Remove the upper door from the middle hinge
by carefully lifting the door straight up.
NOTE: When removing the door, watch for
washer(s) between the center hinge and the
bottom of the freezer door that may stick to the
door. Do not lose.
6. Place the upper door on a smooth surface with
its panel upwards. Loose screw ② and part ①,
then Install them to the left side and tighten
securely.
7. Unscrew the two special flange self- tapping
screws which are used for fixing the middle hinge
part, then remove the middle hinge part that
hold the lower door in place.
NOTE: When removing the door, watch for
washer(s) between the center hinge and the
bottom of the freezer door that may stick to the
door. Do not lose.
8. Place the lower door on a smooth surface with
its panel upwards. Loose screw ② and part ①,
then Install them to the left side and tighten
securely.
special flange
selftapping screws
right upper hinge part
① Stop block
② Self-tapping screw
Loading ...
Loading ...
Loading ...