Loading ...
Loading ...
Loading ...
28
31-1000169 Rev. 4
STEP 11 SLIDE UNITS INTO
ENCLOSURES
ŶRoll the units into the enclosure, being careful not to
pinch the water lines or power cords.
Ŷ5HPRYHDOOWDSHRQWKHIURQWRIHDFKXQLW
Ŷ$ORQJIODWEDURU\DUGVWLFNPD\EHQHHGHGWRJXLGH
the front edge of the anti-tip bracket over the unit.
ŶIf space allows, you may also bend the front edge of
the bracket upward slightly, allowing it to clear the
back of the unit.
ŶRemove top-center trim cover from units.
ŶSecure the unit to the Anti-tip bracket using both
machine screws & washers to engage the threaded
inserts in the anti-tip bracket.
ŶHand start the screws until unit is in desired location
within the install space.
ŶFinalize unit install by tightening the screws fully.
ŶReinstall trim covers.
Installation Instructions
INSTALLATION INSTRUCTIONS FOR MULTIPLE UNITS (cont.)
STEP 12 INSTALL HINGE GUARD
ŶLocate panel attachment set in the bottom drawer.
Ŷ8VLQJVFUHZVSURYLGHGDWWDFKKLQJHJXDUGVWRWKH
upper and lower hinge side of the door.
Hinge Guard
STEP 13 CONNECT HEATER
Ŷ&XWWKHUHPDLQLQJEDQGVDQGUHPRYHWKH(36EORFNV
from the bottom of the units.
Ŷ5HPRYHWRHNLFNVDQGYHQWVIURPWKHERWWRPVRIWKH
units.
Ŷ/RFDWHDQGSOXJKHDWHUVLQWRHOHFWULFDOKDUQHVVHV
using jumper included with Heater Unification Kit.
Heater
Vent
Screw
Toekick
Vent
Screws
(behind
toekick)
Screw
Loading ...
Loading ...
Loading ...