Loading ...
Loading ...
Loading ...
29
EN
Yo u cannot find all the
channels you think should be
available.
The picture on some
channels seems to have been
stretched or squashed.
Even if you use the number
keys, you cannot access a
particular channel.
Yo u set a timer but did not
record what you wanted.
The order of the channels
has changed.
Yo u have forgotten your PIN
code
TV SCART not connected to the
RGB capable SCART socket of
your TV set
Inappropriate TV SCART
The signal may be weak.
The broadcast is probably in
wide screen and the receiver
settings may not be correct.
The parental lock has been
activated on this channel and a
message asks for your PIN code.
The recorder was set
incorrectly.
They have been re-arranged.
Refer to your TV User Manual.
Use the SCART cable supplied with
your receiver.
Try re-tuning your receiver,
following the relevant steps in
paragraph Channels installation.
If you are still missing channels,
call your customer service adviser.
Check the receiver TV format
setting, following the information in
paragraph System Settings. If you
have a wide screen TV, you may also
need to check the settings on your
TV.
Enter your PIN code to access the
channel or unlock it.
The default PIN code is 0000.
Make sure that your recorder is set
for the same time as your receiver.
Refer to paragraph Channels
Organization to change the order
again.
When prompted for your current
PIN code, enter the Master PIN
code instead.This will allow you to
proceed.The Master PIN code is
3001.
Do not forget to set your PIN code
anew!
Keep these codes secret to prevent
others from using them.
Problem Possible cause Action
If you have tried all of the actions suggested above and could not solve the problem,
contact your customer service adviser.
DCR 2520_indice2 18/11/05 13:43 Page 29
Loading ...
Loading ...
Loading ...