Loading ...
Loading ...
Loading ...
AMC / TDS OPERATOR’S MANUAL
7
Watermaze AMC/TDS Operator's Manual 8.913-965.0 - A
PROGRAMMING BACKWASH & DUMP
MODES
The backwash program requires (3) basic instructions
to operate automatically:
A. Operation Days (Usually 7 days a week).
B. Start Time (Usually at night when washing is not
being performed).
C. Mode Run Times (length of backwash and recircula-
tion times)
A. Setting/Editing Program Operation Days
1. Turn control dial to SET PROGRAM OPERATION
DAYS.
2. Set program switch to program A, B, or C. (See Pro-
gram Schedule Sheet for program descriptions).
3. Press +/ON or -/OFF button until CAL (calendar) is
fl ashing.
4. Press the NEXT button to see program operation
days. SU (Sunday) will begin fl ashing.
5. To select the day (fl ashing), press the +/ON button.
To remove a day, press the -/OFF button.
6.
Repeat step 5 until all operation days are selected.
7. Repeat steps 1-6 for Programs A, B, or C.
8. Return dial to the AUTO/ON position.
B. Setting/Editing Program Start Time
1. Turn control dial to SET PROGRAM START TIME.
2. Set program switch to program A, B, or C. (See Pro-
gram Schedule Sheet for program descriptions).
3. Press +/ON or -/OFF button until program start time
number 1 is fl ashing (upper left corner of display).
4. Press the NEXT button.
5. To set the hour, press +/ON or -/OFF button.
6. Press the NEXT button.
7. To set the minute, press +/ON or -/OFF button.
NOTE: Programs 2, 3, 4 should read OFF.
8. Return dial to the AUTO/ON position.
C. Setting/Editing Mode Run Times
1. Turn control dial to SET MODE RUN TIMES.
2. Set program switch to program A, B, or C (see Pro-
gram Schedule Sheet for program descriptions).
3. Mode number 1 will begin fl ashing (lower left corner
of display).
4. Press the NEXT button. Mode number will stop fl ash-
ing and timer display or “OFF” will begin fl ashing.
5. To set run time, press +/ON or -/OFF button.
NOTE: To remove (skip) a mode, press the +/ON
and -/OFF buttons at the same time. OFF should be
displayed. (Refer to Program schedule sheet below,
e.g. Program A, Mode 1 is 30 minutes).
6. Press the NEXT button. The next mode number will
begin fl ashing.
7. Repeat steps 4-6 until all run times have been set
for modes 1-6.
8. Repeat steps 1-7 for Programs A, B, and C.
9. Return dial to the AUTO/ON position.
PROGRAM SCHEDULE SHEET
The Program Schedule Sheet shows descriptions of Modes, Programs and Recommended Settings:
PROGRAM A
Auto Backwash
7 days/week
PROGRAM B
Manual Backwash
PROGRAM C
Test Mode
MODE DESCRIPTION MODE RUN TIME MODE RUN TIME MODE RUN TIME
1 Media Backwash 30 minutes 30 minutes 5 minutes
2 Tank 1 Recovery 15 minutes 15 minutes 5 minutes
3 Carbon Backwash 30 minutes 30 minutes 5 minutes
4 Auto Purge (AMC-3000) 15 minutes OFF 5 minutes
Program
Start Times
1 12:00 AM OFF OFF
2 OFF OFF OFF
3 OFF OFF OFF
4 OFF OFF OFF
Loading ...
Loading ...
Loading ...