Tunturi 18TSFR1000 Rowing

User Manual - Page 18

For 18TSFR1000.

PDF File Manual, 64 pages, Read Online | Download pdf file

18TSFR1000 photo
Loading ...
Loading ...
Loading ...
18
English
NOTE
Connect the power supply with the trainer
before connecting it to the wall outlet.
Always remove power cord when
machine is not in use.
Console (fig F)
1. Display
2. Buttons
3. Tablet/ book support
CAUTION
Keep the console away from direct sunlight.
Dry the surface of the console when it is covered
with drops of sweat.
Do not lean on the console.
Only touch the display with the tip of your finger.
Make sure that your nails or sharp objects do not
touch the display.
NOTE
The console switches to standby mode when the
equipment is not used for 4 minutes.
Explanation Display functions
Time
- Without setting the target value, time will count up.
- When setting the target value, time will count down
from your target time to 0 and alarm will sound or
flash.
- Range 0:00~99:59
Count
- Displays the number of strokes for the active
workout.
RPM
- Displays the Rotation Per Minute.
Display range 0~20~999.
- Without any signal being transmitted into the
monitor for 3 seconds during workout, RPM will
display “0”
Distance
- Without setting the target value, distance will count
up.
- When setting the target value, distance will count
down from your target distance to 0 with an alarm
sound or flash.
- Range 0.00~99.99
Odo
- Automatically accumulates the Total distance for all
exercise sessions.
- Range: 0.0 ~ 99.99 KM/ 0.00 ~ 9999 KM.
Calories
- Without setting the target value, calorie will count
up.
- When setting the target value, calories will count
down from your target calorie to 0 with an alarm
sound or flash.
- Range 0~999.9.
NOTE
This data is a rough guide for comparison of
different exercise sessions which cannot be used
in medical treatment
Watt
- Display current workout watts.
- Range: 0.0 ~ 999.9 Watt.
Target HR
- Display user Target Heart rate
(in workout mode only)
Based on 70% of max. HR (220-Age)
Age
- Display user age (in programming mode only)
- Range: 10 ~ 99
Pulse
- Current pulse will display after 6 seconds when
detected by the console.
- Without any pulse signal for 6 seconds, console will
display “P”.
- Pulse alarm will sound when current pulse is over
the target pulse.
- Range 0-60 ~ 220 BPM.
Loading ...
Loading ...
Loading ...