Loading ...
Loading ...
Loading ...
35
WASH CYCLE OPTIONS
Soil Level (WH2424P model only)
The ‘Soil Level’ option lets you adjust the wash to suit the amount of soil in your load.
For example, select ‘Heavy’ for dirty clothes; for items that are only lightly soiled, select
‘Light’. This adjusts the wash time accordingly to give the load the right amount of
agitation to remove the soil.
Wash Boost
Pre Wash
For extra dirty loads you can perform a ‘Pre Wash’. Your washer will start the wash with
a short wash in cool water to remove excess soil. After this the machine will drain and
then fill at the selected temperature for the main wash.
Simply touch the ‘Wash Boost’ button and select ‘Pre Wash’ when choosing your wash
options. Note: ‘Pre Wash’ cannot be selected after a wash cycle has been started, ie
if you touch and try to select ‘Pre Wash’ it will be unavailable. ‘Pre Wash’ must be
selected at the start of the cycle.
If you use the ‘Pre Wash’ option, liquid or powdered detergent needs to be placed in the
correct detergent compartment. The pre wash compartment is on the right hand side of
the drawer, marked . When you select ‘Pre Wash’, the compartment is flushed at the
start of the cycle.
The detergent for the main wash can either be a powder or a liquid. Place this in the
compartment marked . If using liquid, ensure the internal compartment is installed.
Rinse+
If you have a particularly dirty load, or you have sensitive skin and wish to give your
clothes an extra rinse, select ‘Rinse+’ from the ‘Wash Boost’ options. Your load will
undergo an extra rinse to get rid of any residual detergent or soil in the items.
Note: ‘Rinse+’ will not be available if the ‘Eco’ option has been selected.
Steam (WH2424F model only)
The Steam option adds steam to the wash to actively loosen fibers to improve soil
removal. Use the steam option if you have a particularly heavily soiled load. This option
is available on the ‘Everyday’, ‘Heavy’, ‘Bulky’ and ‘Sanitize’ cycles only.
Only use with colorfast loads.
Note: the ‘Steam’ option cannot be selected after a wash cycle has been started, ie if
you touch and try to select ‘Steam’ it will be unavailable. ‘Steam’ must be selected at
the start of the cycle.
IMPORTANT!
Do not touch the door when the steam option is selected. The door will get hot during
the steam phase of the cycle. Ensure no children play around the washer.
Loading ...
Loading ...
Loading ...