Loading ...
Loading ...
Loading ...
10
INSTALLATION INSTRUCTIONS
Accessories
Please check you received the following accessories with your Fisher & Paykel washer. You
will find them inside the drum or attached to the packaging.
z
2 x Inlet hoses
z
1 x Drain hose guide
z
1 x Installation instructions and User guide
z
1 x Wrench
z
1 x Installation leaflet (attached to the top of the washer)
Unpacking
WARNING!
Recycle or destroy the carton and plastic bags after the washer is unpacked. Make materials
inaccessible to children. Children might use them for play. Cartons covered with rugs,
bedspreads or plastic sheets can become airtight chambers causing suffocation.
To ensure the best performance from your new washer please follow the instructions below.
Removing the packaging:
1 Remove the outer packaging. Note: a small amount of water may be seen inside the
packaging and inside the washer. This is the result of factory testing and is normal.
2 Tilt the machine backwards and ‘walk’ it off the base one foot at a time. Not doing so
may cause damage to your floor and washer.
3 Remove all packaging and accessories from inside the drum. Note: DO NOT remove
the screw or clip holding the hose.
Removing the transit bolts
The clothes washer is fitted with 4 transit bolts at the rear to avoid damage during
transportation.
IMPORTANT!
The 4 transit bolts MUST be removed prior to operation of the machine. Failure to remove
these will result in damage to the machine.
Loading ...
Loading ...
Loading ...