Loading ...
Loading ...
Loading ...
n
Audio Device Settings (Mac OS X only)
A
With the unit power off, connect the unit and Mac using a
USB cable (sold separately).
0
For the connection procedure, refer to the “Connecting a
PC or Mac” section.
(v p. 10)
B
Press X.
C
Press DISC/INPUT to switch the playback media mode to
“USB-DAC
”.
D
Move the cursor to “Go” on the computer screen, and then
click “Utilities”.
0
The utility list is displayed.
E
Double-click “Audio MIDI Setup”.
0
The “Audio Devices” window is displayed.
F
Check that “Use this device for sound output” is checked
in “SA-10S1”.
0
If a different device is checked, select and “Secondary
click” on “SA-10S1”, and then select “Use this device for
sound output”.
.
⑥
SA-10S1
SA-10S1
G
Select the “SA-10S1
” format.
0
It is normally recommended to set the format to
“384000.0 Hz” and “2ch-32 bit Interger”.
.
⑦
SA-10S1
SA-10S1
H
Quit Audio MIDI Setup.
n
Playback
Install the desired player software on your computer
beforehand.
Use the rear panel USB-DAC port to connect this unit to a
computer. (v
p. 10)
1
Press DISC/INPUT to switch the playback
media mode to “USB-DAC”.
Start playback on the computer’s player software.
The digital audio signal that is being input is shown as
follows in the display.
“USB:xxxxk” or “USB:DSD xxxxM”
(xxxx is the sampling frequency.)
0
If the sampling frequency cannot be detected,
“Unlock
” will be displayed.
0
“Unsupported” is displayed when audio signals that
are not supported by this unit are input.
n
Audio signals that can be played back
See “D/A converter” (v
p. 39).
NOTE
0
Perform operations such as playback and pause on the
computer. At this time, you cannot perform operations with
buttons on this unit or the remote control.
0
When this unit is functioning as a D/A converter, sound is
not output from the computer’s speakers.
0
If the computer is disconnected from this unit while the
computer music playback software is running, the playback
software may freeze. Always exit the playback software
before disconnecting the computer.
0
When an error occurs on the computer, disconnect the
USB cable and restart the computer.
0
The sampling frequency of the music playback software
and sampling frequency displayed on this unit may differ.
0
Use a cable that is 10 ft (3 m) or less to connect to the
computer.
ENGLISH
23
Printing:Color:Black
Loading ...
Loading ...
Loading ...