Loading ...
Loading ...
Loading ...
Stopping digital outputs
Stopping digital audio output reduces a source of noise that
affects sound quality, enabling higher sound quality playback.
1
Press DIGITAL OUT.
The digital audio output is switched on and off each
time the button is pressed.
0
When digital output is turned off, the “D OFF”
indicator lights up on the display.
Setting the top priority playback
layer for Super Audio CDs
The layer that is played with priority when the disc is loaded
can be set.
1
Press DISC/INPUT to select the playback
media mode to “Disc”.
2
Check that no disc is loaded.
0
If the layer is switched while the disc is being loaded,
the playback layer switches for that disc, but the top
priority playback layer setting itself does not change.
3
Press SOUND MODE and switch to the layer
you want to set.
STEREO
(Default):
Plays back the 2-channel area
of the Super Audio CD.
MULTI:
Plays back the multi-channel
area of the Super Audio CD.
The analog output of this unit
outputs a down-mixed 2-
channel signal.
CD:
Plays back the CD layer of the
Super Audio CD.
0
When a disc is loaded after the setting has been made, the
contents recorded on the set layer are displayed.
0
If a disc that does not contain the layer set for top priority
playback is loaded, the contents recorded on another layer
are displayed automatically.
0
This setting is stored in the memory and is not cleared
even when the disc holder is opened or closed or the
power is turned off. To change the setting, repeat the
procedure above.
0
The priority playback layer cannot be set when a disc is
inserted or “Open
” is shown on the display.
0
If the area and layer have not been set for a disc, the
priority playback order is as follows:
A
STEREO
B
MULTI
C
CD
ENGLISH
12
Overview Connections Playback Settings Tips Appendix
Printing:Color:Black
Loading ...
Loading ...
Loading ...