Loading ...
Loading ...
Loading ...
94
• Recipients: This field allows the user to enter the receiver email address. These email
addresses are the ones that will receive any emails pertaining to alert and alarm
emails sent by the camera. Up to 3 email addresses can be entered in this field.
Interval: This field allows the user to define, in seconds, how long the system should
wait between sending emails. This prevents multiple emails from being sent out.
• Keep Alive: This checkbox allows the user to enable a function to periodically check in
with the SMTP server to ensure it can connect correctly.
• Email Test: This button causes the system to automatically send out an email to test
the connection is OK or not. Prior to the email test, please save the email setup
information.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the
Refresh button. To save the settings, click the Save button.
5.4.2.6. UPnP
UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices
to the internet. In the case of this camera, it allows the camera to connect to the router in
an easy manner to quickly allow for remote access. Below is a screenshot of the UPnP
settings screen:
Below is an explanation of fields on the UPnP settings screen:
• Enable: This checkbox allows the user to enable the UPnP function.
• Router State: This field shows the UPnP status and has two options: Unknown: This
means that
UPnP mapping has failed. Successful: This means that UPnP mapping has succeeded.
• Port Mapping List: This table is used to show how the ports for each protocol listed
below have been remapped by the UPnP protocol.
o The first column shows the checkboxes to enable the corresponding service on
the table.
Loading ...
Loading ...
Loading ...