Loading ...
Loading ...
Loading ...
5
Before using for the first time
1 Remove the plastic blade covers from the knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade during manufacture and transit only.
2 Wash the parts see ‘care and cleaning’.
Important – Plug and Fuse Information
Before plugging in
l
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
l
The wires in the cord are coloured as follows:
Blue = Neutral
Brown = Live
l
If the plug supplied with your appliance has a fuse fitted it is rated either 10A or 13A. If the fuse fails it must
be replaced with one of the same rating.
l
If the plug or cord requires replacing a new cord set should be fitted by an Authorised Kenwood Repairer.
Note:
l
For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost
then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by
colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).
l
If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may
arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.
l
Before removing the lid, switch off and wait until the disc has
completely stopped.
l
Do not pour hot liquids down the feed tube.
Express Serve
l
Avoid contact with moving parts. Keep fingers out of the food
outlet opening.
l
Do not operate when using the Dicer or Discs without the
slinger plate fitted. If the slinger plate is not fitted food will
clog under the plate and not exit the food outlet, resulting in
damage to your attachment.
l
The citrus juicer is not designed to be used with the Express
Serve. Always use the citrus juicer with the main bowl.
Cleaning
l
Wipe the power unit with a damp cloth, then dry. Ensure that
the interlock area
8
is clear of food debris.
l
Do not immerse the power unit, blade assemblies or blender
base in water.
l
The bowl, lid, pusher and all attachments/tools apart from
the blade assemblies and blender are suitable for both
handwashing and dishwashing.
l
The blade assemblies should be brushed clean and rinsed under
running water.
l
Blender - Fill with warm water, fit the lid, then switch on for 20-30
seconds. Empty, then rinse. If it is still dirty use a brush. Wipe, then
leave to air-dry.
Loading ...
Loading ...
Loading ...