Loading ...
Loading ...
Loading ...
When operating external storage devices (USB, SD),
you can select files from the list.
1 Press M.C. to select the setting.
OFF—USB memory1—USB m emory2—SD card
Warning tone (warning tone setting)
If the front panel is not detached from the head unit
within four seconds of turning off the ignition, a warn-
ing tone sounds. You can turn off the warning tone.
1 Press M.C. to turn the warning tone on or off.
AUX1 (front AUX input setting)/AUX2 (rear RCA
input setting)
Activate this setting when using an auxiliary device
connected to this unit.
1 Press M.C. to turn auxiliary setting on or off.
Dimmer (dimmer setting)
To prevent the display from being too bright at night,
the display is automatically dimmed when the car’s
headlights are turned on. You can turn the dimmer on
or off.
1 Press M.C. to turn dimmer on or off.
Contrast (display contrast setting)
1 Press M.C. to select the setting mode.
2 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or de-
creased.
Digital ATT (digital attenuator)
When listening to a CD or other source on which the
recording level is high, setting the equalizer curve
level to high may result in distortion. You can switch
the digital attenuator to low to reduce distortion.
! Sound quality is better at the high setting so this
setting is usually used.
1 Press M.C. to select the setting.
HIGH (high) —LOW (low)
AUDIO reset (audio reset)
You can reset all audio functions.
1 Press M.C.
Does it RESET? appears in the display.
2 Press M.C.
3 Turn M.C. to select desired setting.
Are You Sure? appears in the display.
4 Press M.C.
Complete appears in the display and audio func-
tions are reset.
! To cancel this fun ction on the way, press
BAND/
.
Internal AMP (power amp setting)
This unit features high power amplifier. However, in
particular system, external amplifiers are used in-
stead of internal amplifier. If you use external ampli-
fiers in order to establish a multi-amp system, and
don't use internal amplifier, it is recommended to turn
off the internal amplifier. Turning off internal amplifier
reduces the noise that comes from the behavior of in-
ternal amplifier.
1 Press M.C. to turn the internal power amplifier on
or off.
Demonstration (demo display setting)
1 Press M.C. to turn the demo display on or off.
Ever-scroll (scroll mode setting)
When ever scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
1 Press M.C. to turn the ever scroll on or off.
BT AUDIO (Bluetooth audio activation)
You need to activate the BT Audio source in order to
use a Bluetooth audio player.
1 Press M.C. to turn the BT Audio source on or off.
Clear memory (resetting the Bluetooth wireless tech-
nology module)
Bluetooth device data can be deleted. To protect per-
sonal information, we recommend deleting this data
before transferring the unit to other persons. The fol-
lowing settings will be deleted.
! phone book entries on the Bluetooth telephone
! preset numbers on the Bluetooth telephone
! registration assignment of the Bluetooth tele-
phone
! call history of the Bluetooth telephone
! information of the connected Bluetooth telephone
! PIN code of the Bluetooth device
1 Press M.C. to show the confirmation display.
YES is displayed. Clearing memory is now on
standby.
If you do not want to reset phone memory, turn
M.C. to display CANCEL and press to select.
2 Press M.C. to clear the memory.
Cleared is displayed and the settings are deleted.
! While this function is in use, do not turn off
the engine.
BT Version info. (Bluetooth version display)
You can display the system versions of this unit and
of Bluetoo th module.
En
36
Section
02
Operating this unit
Loading ...
Loading ...
Loading ...