Loading ...
Loading ...
Loading ...
Adjusting the audio finely
By carrying out the following settings/adjust-
ments in the order shown, you can effortlessly
create a finely-tuned sound field.
1 Adjusting time alignment (TA1, TA2)
2 Adjusting network (NW 1, NW 2, NW 3,
NW 4)
3 Adjusting equalizer curves (EQ 1 )
4 Adjusting the 16-band graphic equalizer (EQ 2)
Standard mode
Adjusting the audio easily
The following functions let you easily adjust
your audio system to match the car interior
acoustic characteristics, which vary depend-
ing on the type of car.
1 Using the position selector ( POSI)
2 Auto TA and EQ (auto-time alignment and auto-
equalizing)
3 Using fader/balance adjustment (F/B)
4 Recalling equalizer curves
Adjusting the audio finely
By carrying out the following settings/adjust-
ments in the order shown, you can effortlessly
create a finely-tuned sound field.
1 Using time alignment (TA1, TA2)
2 Using subwoofer output (SW 1)
3 Adjusting subwoofer settings (SW 2)
4 Adjusting low pass filter attenuation slope
(SW 3)
5 Setting the high pass filter for front speakers
(F.HPF 1, F.HPF 2)
6 Setting the high pass filter for rear speakers
(R.HPF 1, R.HPF 2)
7 Adjusting equalizer curves (EQ 1 )
8 Adjusting the 16-band graphic equalizer (EQ 2)
Extra functions
These functions are helpful in adjusting the
sound to suit your system or your personal
preferences.
! Adjusting loudness (LOUD)
! Adjusting source levels (SLA)
! Using automatic sound levelizer (ASL)
Introduction of audio adjustments
1
1 Audio display
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
3-way network mode
BAL (balance adjustment)—NW 1 (network
adjustment 1)—NW 2 (network adjustment 2)
—NW 3 (network adjustment 3)—NW 4 (net-
work adjustment 4)—POSI (position selector)
—TA1 (time alignment setting)—TA2 (time
alignment adjusting)—LOUD (loudness)—
EQ 1 (graphic equalizer)—EQ 2 (16-band gra-
phic equalizer)—A.EQ (auto-equalizer on/off)
—ASL (automatic sound levelizer)—SLA
(source level adjustment)
Standard mode
F/B (balance adjustment) —POSI (position se-
lector)—TA1 (time alignment setting)—TA2
(time alignment adjusting)—LOUD (loudness)
—EQ 1 (graphic equalizer)—EQ 2 (16-band
graphic equalizer)—SW 1 (subwoofer on/off)
—SW 2 (subwoofer cut-off frequency)—SW 3
(subwoofer slope)—F.HPF 1 (front high pass
filter slope)—F.HPF 2 (front high pass filter
cut-off frequency)—R.HPF 1 (rear high pass fil-
ter slope)—R.HPF 2 (rear high pass filter cut-
off frequency)—A.EQ (auto-equalizer on/off)—
ASL (automatic sound levelizer)—SLA (source
level adjustment)
En
20
Section
02
Operating this unit
Loading ...
Loading ...
Loading ...