Loading ...
Loading ...
Loading ...
12
Preparing the Camera
Charging the Battery Pack
Recharge the battery pack with battery charger CB-2L or CB-2LE
the first time you use the camera or when the “Change the battery
pack” message is displayed.
Battery charger model names and types vary by region.
• Insert the battery pack into the charger as shown and plug the
charger into an electrical outlet.
• The charging indicator will flash red while the battery pack is
charging. It will change to a steady red when the charge is
complete.
• After charging, unplug the battery charger and remove the
battery pack from it.
• The battery pack utilizes lithium ion cells, avoiding the need to
completely use or discharge the battery charge before recharging it.
You may recharge the battery at any charge state without
permanently reducing its capacity.
• It takes approximately 120 minutes to charge a battery pack fully
from a fully discharged state. (Based on standard Canon testing
conditions) Please charge it at an ambient temperature ranging
between 5 and 40 ºC (41 and 104 ºF).
• Charge times may vary according to the ambient temperature and
the charge state of the battery pack.
• To protect and prolong the life of the battery pack, do not
charge it for longer than 24 hours at a time.
CB-2L CB-2LE
AC Power Cord
Loading ...
Loading ...
Loading ...