Loading ...
Loading ...
Loading ...
16
OPERATION IN MANUAL MODE
A. Press START and the treadmill will start operating after 3 seconds of countdown. The initial speed
is 1.0 KM/H for metric system or 0.6 MPH for imperial system.
B. Press SPEED + / SPEED - to adjust speed, or press speed shortcuts to change to the speed
marked on the key;
C. Press INCLINE + / INCLINE - to adjust the incline, or press incline shortcuts to change to the
incline marked on the key;
D. When the treadmill is running, press STOP to stop the treadmill;
E. To stop the treadmill immediately, remove the safety key; then, LCD window will display “---” and
the buzzer will beep three times.
F. When the countdown value reaches zero, the buzzer will beep three times. The speed window will
display END. Five seconds later, the treadmill will return to the standby state and the buzzer will
make long alarm beep sound.
G. If a value reaches the set range, it will reset to 0 and the treadmill will stop. In manual mode, the
treadmill will stop when the time accumulates to be more than 99: 59 (100 min).
PROGRAM MODE
1. The initial time is set to be 30 min. Only time can be set. Setting range: 5:00- 99:00. Press SPEED
+ / SPEED - or INCLINE + / INCLINE - to adjust the set value;
2. Press START key. The treadmill will start running and the speed will gradually increase to the
value for the first section of auto program (see details in the table of program parameters);
3. Press SPEED + / SPEED - to adjust speed, or press speed shortcuts to change to the speed
marked on the key;
4. Press INCLINE + / INCLINE - to adjust the incline; or press incline shortcuts to change to the
incline marked on the key;
5. Each program is divided into 20 sections; operating time for each section will be 1/20 of the set
time.
6. The buzzer will sound for three times when switching from one section to another;
7. When the set time goes to zero, the treadmill will slow to a stop. The speed window will display
END; 5 seconds later, the treadmill will return to the standby state; then, the treadmill will beep
three times and then make one long beep when the treadmill is stopped.
8. At any time, if you need to stop the treadmill immediately, remove the safety key. LCD window will
display “---” and the buzzer will beep three times.
Loading ...
Loading ...
Loading ...