Loading ...
Loading ...
Loading ...
8
MAINTENANCE & CARE
General cleaning will help prolong the life and improve performance of your treadmill. Keep the unit
clean and maintained by dusting the components on a regular basis. Cleaning the two exposed sides
of the Running Belt (No. 5) will prevent dust from accumulating underneath. Keep your running shoes
clean so that dirt from the shoes does not wear out the Running Board (No. 6) and Running Belt (No.
5). Clean the surface of the Running Belt (No. 5) with a clean damp cloth.
To better maintain the treadmill and prolong its life it is suggested that the machine be powered off for
10 minutes every 2 hours and fully powered off whenever not in use.
CENTERING THE RUNNING BELT:
Place the treadmill on level ground and set it at 3-5mph to check if the Running Belt (No. 5) drifts from
the center.
1. If the Running Belt (No. 5) drifts to the
right, turn the adjusting bolt on the right side
¼ turn clockwise, then turn the left adjusting
bolt ¼ turn counter-clockwise. If the
Running Belt (No. 5) does not move, keep
adjusting ¼ turn at a time until it centers.
Refer to Fig. A.
2. If the Running Belt (No. 5) drifts to the
left, turn the adjusting bolt on the left side ¼
of a turn clockwise, then turn the right
adjusting bolt ¼ turn counter-clockwise. If
the Running Belt (No. 5) does not move,
keep adjusting ¼ turn at a time until it
centers. Refer to Fig. B.
3. Over time the Running Belt (No. 5)
will loosen. To tighten the Running Belt (No.
5) turn the Left & Right side adjusting bolts
one full turn clockwise, check the tension of
the Running Belt (No. 5). Continue this
process until Running Belt (No. 5) is at the
correct tension. Make sure to adjust both
sides equally to ensure correct Running
Belt (No. 5) alignment. Refer to Fig. C.
Fig. A
Fig. B
Fig. C
Loading ...
Loading ...
Loading ...