Loading ...
Loading ...
Loading ...
en Troubleshooting
46
Fault Cause troubleshooting
The swivel arm cannot be
opened or closed because
the tool is jammed in the
bowl.
Drive is not in the parked po-
sition after a safety system
has stopped processing or
the power supply has been
interrupted.
1. Set the rotary switch to .
2. Eliminate the problem that caused
the appliance to stop.
→"Safety systems", Page38
3. When the swivel arm is open, re-
move the tool and close the swivel
arm.
4. Set the rotary switch briefly to and
then back to .
a The drive remains on for a short
time until the parked position is
reached.
Loading ...
Loading ...
Loading ...