Loading ...
Loading ...
Loading ...
16
CARE & CLEANING
Caution for aluminum use on the cooktop
• Aluminum Foil - Use of aluminum foil on a hot
cooktop can damage the cooktop. Do not use thin
aluminum cooking utensils or allow aluminum foil to
touch the surface elements under ANY circumstances.
• Aluminum utensils - The melting point of aluminum
is much lower than that of other metals. Care must be
taken when aluminum pots or pans are used on the
cooktop. If aluminum pans are allowed to boil dry when
using the cooktop, the utensil may be damaged or
destroyed.
Replacing the oven light
Be sure the range is unplugged and all parts are COOL
before replacing oven light. Wear a leather-faced glove for
protection against possible broken glass.
The interior oven light bulb is located at the upper left rear
of the oven cavity.
To replace the oven light bulb
1. Turn electrical power off at the main source or unplug
the range.
2. Replace bulb with a new 40 watt appliance bulb.
3. Turn power back on again at the main source (or plug
the appliance back in).
4. The clock will then need to be reset. To reset, see
“Setting the clock” in this Use & Care Guide.
For models that have a visible lower bake element
ONLY - This bake element was designed to be tilted up
using your hand from the front of the bake element for
cleaning purposes. Remove the bottom oven rack before
raising the element. Do not to raise the element more
than 4 or 5 inches from the resting position.
Cleaning under lower element (some models)
The oven bake and broil elements may appear to have
cooled after they have been turned OFF. The elements
may still be hot and burns may occur if these elements
are touched before they have cooled sufciently.
Loading ...
Loading ...
Loading ...