Loading ...
Loading ...
Loading ...
Note: Daub vaseline at the corresponding places when installing the pistons, piston seals,
stirring shaft and bellmouth seals, for often using vaseline can prolong the service life of the
components.
2) Body cleaning
Since the consumers require beautiful appearance, clean and sanitary machine, please keep the
appearance clean at any time. You can use the warm towel to scrub the body to remove the dirts
and spots, but avoid washing it directly with waer in case the appliance breaks down.
3) Condenser cleaning
After the machine works a period of time, the condenser will be covered with dusts, thus
affecting the heat dissipation and making the refrigerating effect worse (which embodies: the
output of ice cream drops in the same time or it is hard to take shape.). Please have it cleaned one
time every three months (If the working environment is poor, please clean it once every month.)
by professional workers. Before clean the condenser, please switch off the power supply and note
not damaging the condenser fins.
4) Adjustment of the belt
After the machine works a period of time, the driving belt of the stirring system may be pulled
longer, so timely adjustment to the belt should be made by professionals. Before adjustment, you
must cut off the power supply. Then dismantle the enclosure plates to adjust the belt tension nuts
and ensure appropriate tightness. If you still feel the bilt is still to loose after adjustment, please
replace it with the same typed belt.
Notes: After a long time of use, it is normal that the driving belt wears down, which shall not
be included in the after-sales service of our products. When the driving belt becomes longer, the
following phenomena may occur: unwork of the machine, changed hardness, big noise, glue smell,
etc. Please have it adjustment timely by yourself or by professionals. If necessary, please replace it.
The time interval for adjustment and replacement depends on the machine’s utilization rate.
（7）
Loading ...
Loading ...
Loading ...