Loading ...
Loading ...
Loading ...
a. Take about 10L of warm water (40-50℃) and add appropriate amount of foodstuff cleaning
solution to the water, making them to the disinfectant. Then pour the disinfectant into the two
material cylinders, and let the disinfectant flow into the refrigerating cylinder.
b. Press the “Wash” key to run for 5 minutes. Pull down the handle to discharge the cleaning
solution.
c. Add clear water to the material cylinders and rinse 2-3 times. It is OK.
Notes: a. In the course of cleaning and disinfection, you cannot press the “Auto” key, and
you must observe the the display screen.
b. After cleaning, you must discharge the water in the cylinders completely. Otherwise, the
water will frozen to freeze the cylinder during refrigerating and the stirring shaft will be damaged.
5. Operating instructions
a. The “Atuo” key
As you press the “Auto” key, the buzzer will twitter a short sound and the Atuo indicating lamp be
on at the same time. The machine enters the automatic working state, and the stirring motor begins
to run. The actual measured hardness shows the present current value of the stirring motor. After
10 seconds, the compressor, draught fan and solenoid valve begins to work and the machine enters
the full automatic mode. When the actual measured hardness reaches the set hardness, the machine
will automatically stop and enter the auto standby mode. When the stopping time reaches the set
time, the machine begins to work again and repeats the same cycle. If you want to stop the
machine, just press the “Stop” key.
（4）
Loading ...
Loading ...
Loading ...