Loading ...
Loading ...
Loading ...
46
©
2018 DJI All Rights Reserved.
MATRICE 200
User Manual
Status LED Alarm Remote Controller Status
—
Solid Red ——
The remote controller is set as primary but is not
connected with the aircraft.
—
Solid Green ——
The remote controller is set as primary and is
connected with the aircraft.
—
Solid Purple ——
The remote controller is set as secondary but is not
connected with the aircraft.
—
Solid Blue ——
The remote controller is set as secondary and is
connected with the aircraft.
Slow Blinking Red D-D-D
......
Remote controller error.
RTH LED Sound Remote Controller Status.
—
Solid White
chime Initiates RTH procedure.
Blinking White D
. . .
Sends RTH command to aircraft.
Blinking White DD
.. .. ..
Aircraft is returning to the Home Point.
The Remote Status Indicator will blink red and sound an alert when the battery level is
critically low.
Linking the Remote Controller
The remote controller comes linked to your aircraft before delivery. Linking is only required when
using another remote controller for the rst time. Follow these steps to link a remote controller:
1. Power on the remote controller, connect to your mobile device, and launch DJI GO 4.
2. Power on the Intelligent Flight Battery.
3. Enter Camera View and tap the Linking Remote Controller button shown below.
Charge Mobile Phone
Linking the Remote Controller
Button Customization
Not Defined
Never
C1
C2 Not Defined
Customize both C1 and C2 buttons on the back of the remote controller.
Remote Controller Settings
Loading ...
Loading ...
Loading ...