Dji MATRICE 200 User Manual

Loading ...

MATRICE 200

User Manual

Turning ON/OFF

Turning On: Press the Power button once, then press again and hold for two seconds to power on.

The Power LED will turn red and the Battery Level Indicators will display the current

battery level.

Turning Off: Press the Power button once, then press again and hold for two seconds to power off.

Heating the Battery

Manual Heating: Make sure the battery is powered off. Press and hold the Power button for three

seconds to initiate battery warm up manually.

The battery will warm up if the temperature is below 59℉ (15℃). As it warms, LEDs 1 & 2 and

LEDs 3 & 4 will blink alternately. The battery will stop warming when it reaches 68℉ (20℃). The

temperature of the battery will be remain between 59-68℉ (15-20℃) when alternating LED 1 and

LED 4 blinking indicates that it is above 59℉ (15℃). This will last for approximately 30 minutes,

powering off automatically.

Auto Heating: Insert the batteries into the aircraft and power it on. When the temperature of the

battery is below 59℉ (15℃), it will warm up automatically. Check the LEDs for the current power

level.

Low Temperature Notice:

1. The performance of the intelligent Flight Battery is significantly reduced when flying in low

temperature environments (temperatures below 5℃). Ensure that the battery is fully charged and

the cell voltage is at 4.35 V before each ight.

2. End the ight as soon as DJI GO 4 displays the “Low Battery Level Warning” in low temperature

environments. You will still be able to control the aircraft’s movement when this warning is

triggered.

3. In extremely cold weather, the battery temperature may not be high enough even after warming

up. In these cases, insulate the battery as required.

4. To ensure optimal performance of the battery, keep the battery temperature above 15℃.

5. Battery insulation paste is available for you to use.

Checking Battery Levels

Battery Level Indicators display how much power remains. When the battery is turned off, press the

Power button once and the Battery Level Indicators LEDs will display the current battery level. See

below for details.

The Battery Level Indicators will also show the current battery level during discharging. The

indicators are dened below.

: LED is on.

: LED is ashing.

: LED is off.

Loading ...

Dji MATRICE 200 The Drone