Dji MATRICE 200 User Manual

Loading ...

MATRICE 200

User Manual

3. Tap once on the target and wait for the “GO” icon to appear. Tap the “GO” icon to conrm the

selection and the aircraft will automatically y toward the target.

VS 2.0M/S

09:29

AF/ MF

FPV

74%

70%

4.07V

In Flight (GPS)

P-GPS

ISO

SHUT TER

200 0.3

5.61/200 20:12

SD TIME

4KP30

5000K

Custom

10.0

VS 2.0

m/s

VPS 2.0mH.S 10.0

km/h

DO NOT y the aircraft over people, animals, small or ne objects (e.g. tree branches and power

lines) or transparent objects (e.g. glass or water). TapFly may not work properly when the aircraft

is ying over water or snow covered areas.

Watch for obstacles in the ight path and steer clear of them.

There may be deviations between expected and actual ight paths selected in TapFly.

The selectable range for target direction is limited. You cannot make a selection in Direction close

to the upper or lower edge of the screen.

Be extra cautious when ying in too dark (< 300 lux) or too bright (>10,000 lux) environments.

Enable control stick control of the gimbal inside DJI GO 4 to control gimbal orientation using the

remote controller. When using the control sticks, the gimbal will automatically switch to Free mode.

In this situation, the control stick used to control pitch on the aircraft now controls gimbal pitch,

and the control stick used to control aircraft roll now controls gimbal pan. The left dial now controls

ight speed.

After conrming your TapFly selection, the aircraft will y in the direction marked by the

icon. Note that you

can still use the control stick to control the movement of the aircraft during the ight.