Loading ...
Loading ...
Loading ...
10.9.
HOW TO MAKE YOUR FIRST
SHOT(S) OF ESPRESSO
1. Fill the water tank to the “MAX” marking with clean, filtered water.
2. Turn the coffeemaker ON by using the power switch on the side.
NOTE: The ready indicator light will pulse while the coffeemaker heats
up and will turn solid when the coffeemaker is ready to use.
3. Select the filter size: 1-shot filter or 2-shot filter. Make sure the bump
on the filter is aligned with the notch on the espresso portafilter and
place the filter into the espresso portafilter.
4. Add espresso grounds into the filter.
5. Using the tamper, evenly tamp (press) espresso grounds. Then, wipe
the edges to clear any excess grinds.
6. If using a small cup, lower the height adjustment tray. If using a larger
cup, leave the height adjustment tray in the upright position.
7. Insert the espresso portafilter into the coffeemaker:
a. Keep the espresso portafilter handle flat.
b. Insert the espresso portafilter at a 45° angle (left).
c. Turn the espresso portafilter handle to a 90° angle. The espresso
portafilter should be in a centered position.
a. b. c.
8. Place the cup underneath the espresso portafilter.
9. Turn the knob to the “brew” position.
10. Use the brew size selector to select 1 shot or 2 shots.
11. Press the brew now button.
12. When the coffeemaker beeps and the brew now indicator light turns
off, turn the knob to the “standby” position.
NOTE: When the knob is turned to the “standby” position, the
coffeemaker will enter an automatic cool-down cycle and the ready
indicator light will pulse. When the ready indicator light turns solid, the
coffeemaker has cooled down and is ready to use.
13. Enjoy!
HOW TO MAKE YOUR FIRST
SINGLE SERVE COFFEE
1. Fill the water tank to the “MAX” marking with clean, filtered water.
2. Turn the coffeemaker ON by using the power switch on the side.
NOTE: The ready indicator light will pulse while the coffeemaker
heats up and will turn solid when the coffeemaker is ready to use.
3. Insert a K-Cup® Pod or permanent single serve filter inside the single
serve portafilter and press it down firmly. Then, place the single
server portafilter lid over the K-CUP ® Pod or permanent single
server filter and insert it into the coffeemaker."
NOTE: The single serve portafilter lid does not lay flat when
a K-Cup® Pod is inserted.
4. If using a small cup, lower the height adjustment tray. If using a larger
cup, leave the height adjustment tray in the upright position.
5. Insert the single serve portafilter into the coffeemaker:
a. Keep the single serve portafilter handle flat.
b. Insert the single serve portafilter at a 45° angle (left),
ensuring the lid closes during insertion.
c. Turn the single serve portafilter to a 90° angle. The single
serve portafilter should be in a centered position.
a. b. c.
6. Place the cup underneath the single serve portafilter.
7. Turn the knob to the “brew” position.
8. Use the brew size selector to select the desired brew size.
9. Press the brew now button.
10. When the coffeemaker beeps and the brew now indicator light turns
off, turn the knob to the “standby” position.
NOTE: When the knob is turned to the “standby” position, the
coffeemaker will enter an automatic cool-down cycle and the ready
indicator light will pulse. When the ready indicator light turns solid,
the coffeemaker has cooled down and is ready to use.
11. Enjoy!
NOTE: After brewing, remove the single serve portafilter from the
coffeemaker carefully and dump any remaining water into the sink
before lifting the lid.
1-SHOT
2-SHOT
TURN
TURN
Loading ...
Loading ...
Loading ...