Loading ...
Loading ...
Loading ...
15
English
Press the SETUP
B
button on the remote control to exit the setup menu or
select Back to return to the main menu.
Audio Configuration
When Selected
AUDIO
SETUP
Power On Volume
PC-USB Option
Bluetooth LED
Always on
Phono Stage
Balance
This Audio menu in the Setup menu, provides the following options, selected
by placing the highlight on the desired line using the
T
/
D
arrow buttons
and pressing the Enter
K
button. This action displays the right side options
allowing changes. Change the options using the
T
/
D
arrow buttons and
press the Enter
K
button to confirm.
Bluetooth LED: The Bluetooth LED will be powered on only when Bluetooth is
the selected input or will always be powered on when the unit is ON.
Options include: Always on (Default), On When Selected
Power on Volume: This sets the max volume level for when the unit powers
on to reduce the chance of the previous listening session set too loud.
Options include: Max 50 (Default) - Max 90.
PC-USB Mode: Configures PC-USB mode to Audio Class 1.0 or Audio Class
2.0. Default is Audio Class 1.0.
Options include: Audio Class 1.0 (Default), Audio Class 2.0.
Phono Stage: Relay selectable turntable source input type of Moving Magnet
or Moving Coil cartridge.
Options include: Moving Magnet (Default), Moving Coil
Balance: The Balance Setting adjusts the left-to-right balance of the sound
output. The factory default is the center position or “0”. The value can change
from -10 to +10.
Signal Sense: Monitors if an audio signal is present on the configured Signal
Sense input. The P5 monitors the data stream to determine if there is audio.
If there is no audio detected for 10 minutes, the P5 will enter Signal Sense
Power Mode. When in Signal Sense Power Mode and the P5 detects audio on
the Signal Sense input, the unit will automatically power on. To disable this
function, select the “Disabled” option which is the factory default setting.
Options include: Disabled (Default), COAX , OPT , PCUSB, BLUETOOTH,
COMPACT DISC, PHONO, TUNER, AUX , XLR .
NOTE: When the P5 enters standby mode via the remote control, the
Signal Sense function will not operate until the unit detects the audio
has stopped for the minimum 10 minute time-out period. This prevents
the unit from immediately powering back on if there is still active audio
playing.
NOTE: When the Signal Sense function is activated, the P5 will consume
additional power in signal sense standby mode.
Press the SETUP
B
button on the remote control to exit the setup menu or
select “Back” on the OSD to return to the main menu.
Display Configuration
Medium High
Medium
Low
Medium Low
DISPLAY
SETUP
Temporary Display
Brightness
High
LED Brightness
Back
This Display menu in the Setup menu, provides the following options, selected
by placing the highlight on the desired line using the
T
/
D
arrow buttons
and pressing the Enter
K
button. This action displays the right side options
allowing changes. Change the options using the
T
/
D
arrow buttons and
press the Enter
K
button to confirm.
Brightness: This function sets the brightness of the front display. The setting
is activated during normal operation by a PUSH RELEASE of the DISPLAY button
G
on the remote control. The OSD will always activate at the most bright level
regardless of the Brightness setting to ensure the unit configuration options
can easily be accessed and modified.
Options include: High (Default), Medium High, Medium, Medium Low, Low.
NOTE To dim the front display PUSH-HOLD the DISPLAY
G
button on
the remote control or 3 seconds.
Temporary Display: This function allows the front display to temporarily show
changes to the P5 for the time-out period before the display turns off again.
An example would be to turn on the display to show changes to the source
or volume levels then turn off the display after the time-out period expires.
To disable the temporary display and have the P5 display always on set this
function to Disable.
Options include: Always On (Default), 5 seconds, 10 seconds, 15 seconds.
LED Brightness: Sets the brightness of the ON level of the front panel Power LED.
Options include: High (Default), Medium High, Medium, Medium Low, Low.
Press the SETUP
B
button on the remote control to exit the setup menu or
select “Back” on the OSD to return to the main menu.
Loading ...
Loading ...
Loading ...