Loading ...
Loading ...
Loading ...
COMMERCIAL MODE SETUP
96
COMMERCIAL MODE SETUP
TLL-1100A CLONE CONNECTIONS/LEARNING AND
TEACHING SETUPS
Connections for the TLL-1100A Clone Programmer to Learn the Master TV Setup
Antenna
(or CATV)
Antenna
(or CATV)
TV Link
Loader-Demo
TLL1100A
Ready
TLL1100A
ENTER
RECEIVE SEND
MENU
MODE
CLONE SELECTION MENU
Selected Bank: CBank X Saved
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
CLONE CLOCK = 00:00
TV CLOCK = 00:00
THE CLONE IS VERSION V2.2.2
-To change menu items, Press
channel keys or digits.
-To execute item, Press ENTER.
CLONE SELECTION MENU
Selected Bank: CBank X Saved
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
CLONE CLOCK = 00:00
TV CLOCK = 00:00
THE CLONE IS VERSION V2.2.2
-To change menu items, Press
channel keys or digits.
-To execute item, Press ENTER.
M.P.I. Learning Setup
M.P.I. Teaching Setup
TV Link
Loader-Demo
TLL1100A
Ready
TLL1100A
ENTER
RECEIVE SEND
MENU
MODE
NNootteess::
It is assumed that the TV is connected to a signal
source, the TV source selected is Antenna (RF) In, the signal is
from an Analog channel, not a digital channel, all equipment is
connected to power and turned on and the TLL-1100A Cloner
main menu is displayed on the TV screen, see above.
Warning: Do not use the TLL-1100A while any PPV card is
installed or clone programmer device will be damaged.
OOnn MMaasstteerr TTVV
Set up all Master TV features on
the menus and do a Channel
Search. Add Channel and Aux
labels etc. Tune in an analog
channel. Insert MPI cable into TV
MPI port.
OOnn TTLLLL--11110000AA
1. Turn On the TLL-1100A.
2. Use the Mode button to select
Clone Mode.
3. Use the Left/Right arrow to
select the CBank (1 - 8) to
store the master TV setup in.
4. Plug the other end of the MPI
cable into the MPI port on the
bottom of the TLL.
5. With the Installer remote con-
trol, select item 1 on TLL
menu.
6. Press Enter, to transfer the
Master TV setup into CBankX
on the TLL. The TLL will copy
the master TV setup.
7. When learning is done, discon-
nect MPI cable from Master
TV.
OOnn TTaarrggeett TTVV
1. Connect MPI cable from the
TLL to the MPI port on the
Target TV. Assure that the
correct CBank(X) is selected
on TLL.
2. With the Installer remote con-
trol, select item 2 to Teach
the target TV the master TV
setup.
3. Press Enter to begin teaching.
4. When Teaching is done, dis-
connect MPI cable and power
the TV Off. Unplug TV power
cord.
5. Reconnect TV power cord.
Power the TV On and the
master TV setup should be
resident on the target TV.
Loading ...
Loading ...
Loading ...