Loading ...
Loading ...
Loading ...
COMMERCIAL MODE SETUP
93
COMMERCIAL MODE SETUP FOR MASTER TV
This page provides an overview of the TV configuration. See the pages referenced for more specific, detailed
instructions at each step; how to access and use the Installer menu etc.
NNoottee 11::
Disconnect all Aux inputs. Under certain conditions, Auto Tuning
(Channel search) is disabled if there is an Aux input active.
OOvveerrvviieeww:: CCoommmmeerrcciiaall MMooddee SSeettuupp PPrroocceedduurree
11.. SSeett IInnssttaalllleerr MMeennuu IItteemmss
(Enter TV Installer Menu, see Installer menus for detailed instructions.)
a. Set Installer menu item
111177 FFAACCTT DDEEFFAAUULLTT
,to
000011
and press
EENNTTEERR
on Installer remote. (This clears all installer menu custom set-
tings, channel labels / icons etc. and reloads the factory default settings.)
b. Set Item
000033 BBAANNDD//AAFFCC
.
-
BBrrooaaddccaasstt
: set to
000000
.-
HHRRCC
: set to
000022
-
CCAATTVV
: set to
000011
.-
IIRRCC
: set to
000033
c. Set item
002288 CCHH OOVVEERRIIDDEE
to
000011
. This allows access to Auto Tuning,
Manual Tuning and Channel Edit submenus in the Channel Menu.
d. Set other particular installer items that affect your TV programming net-
work. Enable/Disable Aux sources etc. See Installer menu pages.
Note: Disable all Aux sources that will not be active.
e. After all required installer menu item settings have been adjusted, press
ENTER on the remote to remove Installer Menu.
22.. SSeett UUpp TTVV FFeeaattuurreess ((SSeeee TTVV MMeennuuss sseeccttiioonn))
Channel, Picture, Sound, Lock, Time, Option (Digital Captions etc).
See TV Clonable Options page.
33.. RRuunn AAuuttoo TTuunniinngg ((CChhaannnneell SSeeaarrcchh))
(Search for all available channels.) Go to the Channel menu and access
the Auto Tuning option, follow onscreen instructions.
a. Edit Channel Scan. In the Channel Menu, access Channel Edit.
• Add/Delete channels per your system requirements.
Note: Physical channel numbers are used to identify Virtual channels.
• Add familiar Channel Trademarks/Logos like ABC, CBS, NBC etc. to the
Channel-Time onscreen display. In the Setup menu, select the Channel
Label option. Add identifiable labels for the end user to readily know what
common networks are available.
44.. TTrraannssffeerr TTVV SSeettuupp ttoo IInntteerrnnaall TTVV CCoonnttrroolllleerr:: 22--55--55 ++ MMeennuu MMooddee
After the TV channel scan has been edited and channel label icons added,
enter the Installer menu. Once in the Installer menu, press 2-5-5 and MENU
on the remote. This transfers the TV setup to the internal controller box.
Note: The maximum number of channels including Aux sources that can be
transferred to the TV controller is 140.
55.. AAdddd CCuussttoomm CChhaannnneell LLaabbeellss ffoorr aannaalloogg cchhaannnneellss:: 22--55--44 ++ MMeennuu MMooddee
Enter Installer menu, press 2-5-4 and Menu. Add your own custom text
labels to channel onscreen displays. Note: Digital Channels often have a
broadcaster generated text label. When done to exit mode, press
MMEENNUU
.
66.. VVeerriiffyy TTVV SSeettuupp
At this point, verify that the channel lineup, channel icons and custom labels
are correct. Make sure the TV features are set per your requirements. Set
Installer menu item
002288 CChh OOvveerriiddee
to
000000
to lock the channel scan.
After the preceding has been completed, the Master TV setup is ready to be
copied to a Clone Programmer, see Clone programmer pages.
003 BAND/AFC 00X
028 CH. OVERIDE 001
117 FACT DEFAULT 00X
Typical TV Installer Menu
Review the settings for these
Installer Menu Items
DIGITAL 19-3
WXYZ
MONO
STEREO SAP
Custom Channel Label ‘WXYZ’ created in
2-5-4 + Menu (Add Channel Label) Mode
028 CH. OVERIDE 000
After Master TV setup has been completed,
set Installer menu item 028 Ch Overide to
000. This action locks the channel scan.
000 INSTALLER SEQ 000
UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00
HOSPITAL PTC INSTALLER MENU
Loading ...
Loading ...
Loading ...