Loading ...
Loading ...
Loading ...
COMMERCIAL MODE SETUP
106
COMMERCIAL MODE SETUP
008822 -- CCHHKKSSMM EERRRROORR ((CChheecckkssuumm EErrrroorr))
Enforces rigid M.P.I. checksum validation.
Set to 1 for validation.
Set to 0 to disable (does not check checksum on M.P.I.
async port). SPI is always checked.
008833 -- HHAANNDDSSHHKK TTIIMMEE ((HHaannddsshhaakkee TTiimmee))
Adds an additional delay to the handshake time which
is 64 msec, thus relaxing M.P.I. timing requirements to
be compatible with PC based Windows controlled sys-
tems, range is 0 - 5.
(Timeout = 25.5MS + [25.5 MS* Handshake time]).
008844 -- PPEERRMMAANNEENNTT BBLLKK ((PPeerrmmaanneenntt BBlloocckk))
Allows Lock (Parental Control) blocking schemes to be
permanent by disabling the blocking hours function.
Set to 1 to install Parental Control restrictions perma-
nently.
Set to 0 for user-specified hours control of blocking
schemes.
008888 -- EENN NNOOIISSEE MMUUTTEE ((EEnnaabbllee NNooiissee MMuuttee))
If set to 1, audio mutes if no signal is present.
009900 -- KKEEYY LLOOCCKK
If set to 1, front keyboard buttons Channel, Volume
and Captions are disabled, Power button remains
enabled. If set to 0, front keyboard Channel, Volume,
Captions and Power buttons are all enabled.
009944 -- SSAAPP MMEENNUU EENN ((22nndd AAuuddiioo PPrrooggrraamm))
Set to 1 to enable SAP feature on Function menu, if
Function menu is available.
Set to 0 to disable SAP feature on Function menu, if
Function menu is available.
009966 -- DDEEFF.. AASSPP.. RRAATTIIOO ((DDeeffaauulltt AAssppeecctt RRaattiioo))
Selects default aspect ratio at power up, see settings
below.
NNoottee::
Only applies if item 106 Aspect Ratio Lock is
disabled, set to 0.
Set to 0 “Set By System”.
Set to 1 for 4:3.
Set to 2 for 16:9 (Factory Default).
Set to 4 for Zoom 1
Set to 5 for Zoom 2
009999 -- BBAACCKK LLIIGGHHTTIINNGG
Sets the TV screen brightness at power up, see set-
tings below.
Default setting is 100.
11 -- 110000 SSttaattiicc BBaacckklliigghhttiinngg..
(1 = Dimmest picture, 100 = Brightest picture.)
110011 -- 220000 DDyynnaammiicc BBaacckklliigghhttiinngg..
(101 = Dimmest picture, 200 = Brightest picture.) If
settings are above 200, the TV automatically controls
backlighting depending upon the picture level of the
current program.
110022 -- AATTSSCC BBAANNDD
Sets up TV to receive different types of incoming signals:
0=Broadcast, 1=CATV, 2=HRC, 3=IRC, 4=Same as
NTSC.
110033 -- AATTSSCC TTUUNNEE MMOODDEE
Sets ATSC tuning mode: Default set to 1 for Physical
channel scan.
Set to 0 for Virtual Channel scan.
110044 -- SSTTAARRTT MMIINNOORR CCHHAANNNNEELL
Sets XX-XX digital minor sub start channel at power
up: 0=NTSC. If not 0, number selected is the digital
minor start channel number.
110066 -- AASSPP RRAATTIIOO LLOOCCKK ((AAssppeecctt RRaattiioo LLoocckk))
Set to 1 to retain previous aspect ratio with power Off.
Set to 0 to retain default aspect ratio with power Off.
See item 96 Default Aspect Ratio above.
111166 -- VVIIDDEEOO MMUUTTEE EENN ((VViiddeeoo MMuuttee EEnnaabbllee))
Set to 0 for normal.
Set to 1 for blank.
111177 -- FFAACCTT DDEEFFAAUULLTT ((FFaaccttoorryy DDeeffaauulltt))
Set to 0 for normal.
Set to 1 and press Enter to load presets for all of the
Installer menu item settings.
WARNING: Setting this to 1 and pressing
Enter will reload the factory defaults and
clear the channel list including erasing any
assigned Channel Icons and custom
Channel Labels.
Detailed Descriptions of Installer Menu Items
Loading ...
Loading ...
Loading ...