Loading ...
Loading ...
Loading ...
APPENDIX
114
APPENDIXAPPENDIX
CHANNEL BANKS SETUP TROUBLESHOOTING
CH 011-001 NORMAL-ADDED
Enter -> Change
CC ->VCHIP Menu Ch. Preview -> Exit
CHANNEL PREVIEW - BANK 1
Channel Banks Setup Menu
TThheerree iiss aa pprroobblleemm iinn CChhaannnneell..
■
Installer menu item 028 Ch Overide is set to 000.
Set Ch Overide to 001 to allow access for channel status change.
■
2-5-5+ Menu procedure was not performed.
Channel Banks setup menu will not be available until 2-5-5+ Menu procedure
is done. And, item 028 Ch Overide is set to 001 to allow access for channel
status changes.
■
Blanking a channel in one channel bank will make it blank in all channel banks.
■
Select a channel bank where the deleted channel number is set to ‘Normal
Added’. Direct enter the deleted channel number. Change to the bank you
want to activate the channel in. Select ‘Normal Added’ on the Ch Preview
Channel Banks menu.
■
TV is set up to display ‘Inactive TV’ message if all channels are ‘Normal
Delete’ in Channel Bank 4. Select another channel bank (Bank 1, 2 or 3)
which will return TV to normal operation.
■
Channel was deleted in currently selected channel bank. If banks were set up,
premium channels may only be available on another channel bank. Select the
channel bank where the channel is set to ‘Normal Added’. Or, direct enter chan-
nel number then go to banks menu and select ‘Normal Added’.
■
Item 027 Hospital Mode in Installer menu is set to 0. Set back to default ‘2’
for Channel Banks to appear with Bank or Source key presses.
Cannot change channel
status in menu.
Channel is blanked in all
channel banks.
Channel Preview menu
does not appear.
Cannot tune in deleted
channel on Ch Preview
menu.
‘Inactive TV’ message
appears and then TV
turns Off.
Channel found in scan
does not tune in with
Channel Up/Down.
If ‘Bank’ on Installer
remote is pressed, TV
shows Aux sources selec-
tion menu.
Loading ...
Loading ...
Loading ...