Loading ...
Loading ...
Loading ...
18
CLEANING YOUR ICE MACHINE
Under normal conditions cleaning should be done when
the display shows . You may initiate a cleaning cycle at
any time by pressing and holding the clean button for 10
seconds. will appear in the display indicating the start of
the cleaning process.
You may override in the display without cleaning by
pressing and holding the up, down, & light button for 10
seconds. will scroll in the display and the cleaning
reminder (
) will be reset for another approximate six
month cycle. Failure to clean may reduce the quality and
quantity of ice produced. Once the clean cycle begins, it
can be canceled by pressing three times. Press once
more to start making ice. The clean cycle will automatically
cancel if user fails to activate control at steps 2, 3b, and 5b
within 2 hours.
Required for cleaning:
• Hose and funnel - provided with unit
• Bucket and cleaning sponge
• Clean potable water
• SafeCLEAN Plus™ Cleaner
(Part No. 41015681 by Marvel) 1-8oz. bottle
included with unit.
Need more cleaner? Call Marvel Customer Service at
800.223.3900
Use only SafeCLEAN Plus™ Cleaner. Use of any other
cleaner may damage the nish of the evaporator and will
void the warranty. Follow safety and handling instructions
printed on the SafeCLEAN Plus™ bottle.
!
CAUTION
1. Press and Hold for 10 seconds
a. will appear in the display
b. Remove access shield
c. Remove all ice in bin
d. Remove any ice protruding from the ice dispenser
tube.
2. Insert the end of the cleaning tube into the ice
dispenser; slowly pour in approximately 1 quart of hot
(min. 100º F) potable water. This will melt ice inside the
dispenser tube. It is normal for some water to ow from
the ice dispenser tube and exit from the vent tube while
pouring. Omit this step if no ice is in the ice dispenser
tube.
3. Press and release
a. will appear in the display
b. Mix 4 ounces of SafeCLEAN Plus™ with 2 quarts of
potable water.
4. Wait until appears in the display
a. Using the funnel and cleaning tube, slowly pour
3⁄4 of the cleaning solution into the dispenser
tube. Air and some water will exit the vent tube.
Remove cleaning tube.
b. Press and release
5. will appear in the display
a. The machine will circulate the solution, cleaning and
sanitizing the internal components, for
approximately 20 minutes.
b. While the machine is circulating the cleaning
solution, use 1/2 of the remaining cleaning solution and
a sponge to wipe down the inside of the ice bin and
scoop. Rinse with clean potable water.
6. When appears in the display, 3 soft tones will
sound, indicating the cleaning phase is complete.
• Using the hose and funnel, slowly pour 1.5 quarts
(48 oz.) of clean potable water into the ice dispenser
tube. Air and some water will exit the vent tube.
Cleaning Tube
and Funnel
Ice
Dispenser
Tube
Vent Tube
Figure 38
Figure 39
Figure 40
Loading ...
Loading ...
Loading ...