Loading ...
Loading ...
Loading ...
Making Detailed Adjustments 53
■ Audio Source
Use this setting to select which screen’s audio you want to hear while in split screen mode.
Note: Select Auto to hear audio from either the largest screen or the screen on the left
(depending on the Screen Size setting).
Selecting Memory Settings and Resetting the
Projector
Your projector comes with 8 memory locations that are reserved for color mode calibration by
installers. In addition, there are 2 memory locations where you can save other customized
settings to obtain the best picture quality for each of your video inputs.
Creating Memory Settings
Memory settings can be used to store most of the picture quality settings on page 46 and color
settings on page 47. Before saving them to memory, adjust the settings to the desired levels.
1. Press the
Memory button on the remote control.
2. Select
Save Memory.
3. Select the memory name you want to use, then press the
Enter button to save your
settings.
Note: Saved settings are indicated by a green highlight next to the memory name. If you select
a name that is already in use, the existing settings will be erased and new ones saved in their
place.
Selecting Memory Settings
You can easily recall the memory settings by using the
Memory button on the remote control.
Note: Settings saved for 3D images can only be loaded and
applied to 3D content.
1. Press the Memory button on the remote control.
2. Select
Load Memory.
Split Screen Setup > Audio Source
Loading ...
Loading ...
Loading ...