Loading ...
Loading ...
Loading ...
38
Color:
Adjusts the color saturation. (–24 to +24)
Hue:
Adjusts the tone of color (which color is emphasized, red or
green). (–24 to +24)
Dimmer:
Adjusts the brightness of the display. (+1 to +48)
Temperature:
Adjusts the color temperature, resulting in a better white
balance. (–3 to +3)
p With some pictures, you cannot adjust Hue and Color.
When you touch [Rear View], the mode changes
to the selected camera mode. By touching
[Source], [Navi] or [Apps], you can return to the
selected mode.
5 Touch , , , to adjust.
p The adjustments of “Brightness”, “Contrast” and “Dimmer”
are stored separately when your vehicle’s headlights are off
(daytime) and on (nighttime).
p
“Brightness” and “Contrast” are switched automatically
depending on whether the vehicle’s headlights are on or off.
p “Dimmer” can be changed the setting or the time to switch
it to on or off.
Refer to Setting the dimmer on page 37
p The picture adjustment may not be available with some rear
view cameras.
p The setting contents can be memorized separately.
Displaying the rmware
version
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
35
2 Touch [System Information].
3 Touch [Firmware Information].
The “Firmware Information” screen appears.
Displaying the open source
licenses
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
35
2 Touch [System Information].
3 Touch [License].
The open source licenses of the functions that this product is
equipped with appear.
Updating rmware
CAUTION
The USB storage device for updating must contain only the
correct update file.
Never turn this product off, disconnect the USB storage
device while the firmware is being updated.
You can only update the firmware when the vehicle is
stopped and the parking brake is engaged.
1 Download the firmware update files.
2 Connect a blank (formatted) USB storage
device to your computer, and then locate the
correct update file and copy it onto the USB
storage device.
3 Connect the USB storage device to this
product.
4 Turn the source off.
Refer to Selecting a source on page 12
5 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
35
6 Touch [System Information].
7 Touch [Firmware Update].
8 Touch [Continue] to display the data transfer
mode.
p Follow the on-screen instructions to finish updating the
firmware.
p This product will reset automatically after the firmware
update is completed if the update is successful.
p If an error message appears on the screen, touch the display
and perform the above steps again.
Displaying the “Audio” setting
screen
1 Press .
2 Touch , and then .
The “Audio” setting screen appears.
Using fader/balance adjustment
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 38
2 Touch [Fader/Balance].
p Only the balance can be adjusted when “Network Mode” is
selected as the speaker mode. Touch [Balance] and skip to
step 4.
3 Touch or to adjust the front/rear speaker
balance.
p Set “Front” and “Rear” to “0” when using a dual speaker
system.
4 Touch or to adjust the left/right speaker
balance.
You can also set the value by dragging the point
on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone application volume when the navigation outputs
the guidance voice.
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 38
2 Touch [Mute Level].
3 Touch the item.
ATT (default):
The volume becomes 20 dB lower than the current volume.
Mute:
The volume becomes 0.
Off:
The volume does not change.
System settings Audio
adjustments
Loading ...
Loading ...
Loading ...