Loading ...
Loading ...
Loading ...
10
2. Slide the auxiliary handle onto the base plate. Make sure
the tabs on both sides of the auxiliary handle slide into the
slots on the base plate. Push until it clicks into position
(Fig. 10).
3. Adjust the auxiliary handle to a comfortable working
position. Lock the auxiliary handle by ipping the handle
lock down (Fig. 11).
Operation
Starting + Stopping
Before you start the unit, make sure the trimmer is not
contacting with any object.
1. Slide the battery pack in the battery compartment until it
snaps into position (Fig. 12).
IMPORTANT! Make sure that the battery pack is secured
to the tool before beginning operation.
2. To turn the trimmer + edger ON, press and hold the safety
lock button with your thumb, then squeeze the ON/OFF
trigger switch with your ngers. Once the machine powers
on, you can release the safety lock button and proceed
with operation (Fig. 13).
3. To switch OFF, release the trigger switch. Remove the
battery from the battery compartment (Fig. 13).
mWARNING! Always remove the battery pack from the
trimmer + edger during work breaks and after nishing work.
Telescoping Pole Adjustment
1. Disconnect the trimmer + edger by removing the battery
pack.
2. Turn the telescoping locking coupler clockwise to unlock
the telescoping pole (Fig. 14).
Fig. 10
Auxiliary
handle
Base plate
TabSlot
Fig. 11
Auxiliary
handle lock
Flip down
to lock
Fig. 12
Battery compartment
Battery pack
Fig. 13
Safety lock button
Trigger switch
Fig. 14
Telescoping
locking coupler
Loading ...
Loading ...
Loading ...