Loading ...
Loading ...
Loading ...
• Possible damage caused by incorrect, improper use or unqualified repair works
will not be subject to liability. In these cases warranty claims become void.
• Please use the integrated coffee grinder for roasted and untreated beans only,
never for other foodstuffs! Please make sure there are no foreign substances
among the coffee beans - failing this warranty claims will become void.
• If repair services are required, including replacement of the power cord, please
first contact your dealer or the service-hotline. Afterwards send the machine to
the dealer from whom it was purchased – or to NIVONA national customer
services.
• If the appliance’s power cable is damaged, it must be replaced by the manufac-
turer, its customer service or a similarly qualified person to avoid danger.
Attention: Repairs to electrical appliances must only be undertaken by a pro-
fessional! Improper repairs may result in severe danger for the user! Should
the appliance be used or maintained improperly or incorrect, the warranty
shall become void!
Attention: Using the on/off switch (fig.1/J) during the brewing process may
damage the appliance! Turn the appliance off only after it has finished the
job.
Attention: Risk of burning! When drawing steam or hot water, a shot of hot
water may spray from the coffee spout. Allow the spout to cool down before
you touch it.
2. Initial start-up
2.1. Getting started
➔ Unpack the appliance and all items belonging to it with care.
The following are included in the package contents:
• User Manual
• Warranty card
• Measuring spoon with assembly instruction for lter insert
• Two cleaning tabs
• One Claris lter
• One testing strip for water hardness
Note: In case of customer service being required, the appliance should be shipped in its original pack-
aging. Please keep this safe, including the polystyrene parts.
➔ Place the appliance on a at, dry and suitable surface.
➔ Plug the power cord into a professionally installed mains socket.
➔ Your appliance has a power cord bay – if the cable is too long, place the excessive length in the
power cord bay at the back (g. 1/T)
68
1. Safety information / 2. Initial start-up
04_Niv_859_BDA_sw_GB_03.indd 68 13.04.17 15:42
Loading ...
Loading ...
Loading ...