Loading ...
Loading ...
Loading ...
37
Options
Soak (WH8560F and WH8060F models only)
The
SOAK option provides a two-hour soak during the middle of the wash phase of the
cycle. The washer will then complete the rest of the cycle. During SOAK, the washer will
agitate for a few seconds every minute.
SOAK is not available on WOOL, DRUM CLEAN, or SUPER QUICK cycles.
If the SOAK option is selected on a QUICK cycle, the soak time will be one hour only.
Ensure items are colourfast before using soak.
Do not use your washer to soak items in bleach or sanitiser and if you’ve soaked items in
a bucket, do not tip the contents of the bucket into your washer. The chemicals in these
products are very corrosive to metal surfaces and can damage your washer. Rinse and
wring items out thoroughly before placing them in your washer.
Wrinkle Free (F/P models)
We recommend you remove the clothes from the washer immediately after the completion
of the cycle to minimise wrinkling and creasing of items and to prevent dye run. However, if
you will not be present at the end of the wash you can select
WRINKLE FREE.
When WRINKLE FREE is selected, the washer will tumble the clothes once every 15minutes
for up to 12 hours after the cycle has finished. The WRINKLE FREE light and button will
flash, and the washer will beep at regular intervals to remind you to remove your load. To
remove the load during this phase, simply press the button.
Select
SOAK from the OPTIONS menu.
To exit
SOAK early, press and turn the dial
to select RINSE. Change the SPIN SPEED if
necessary (eg select 500 if washing delicate
or creasable items) and press .
WASH CYCLE OPTIONS
1
2
Loading ...
Loading ...
Loading ...