Loading ...
Loading ...
Loading ...
16
USING YOUR COOKTOP
If a burner does not light
Turn the control dial to O (OFF) and wait at least 1 minute before trying again. This
is to allow the gas to disperse. If after trying again the burner still does not light, check
that:
●
the cooktop is plugged in and the power supply is switched on
●
there is no power failure in your home or neighborhood
●
the gas is turned on
●
the gas bottle is not empty (if you use bottled gas)
●
the ignitors are sparking. If they are not sparking, they may be dirty or wet. Clean them
with a toothbrush and methylated spirits, as shown in below. See ‘Care and cleaning’ for
instructions on removing and replacing the burner parts.
If the flame is irregular
Check that the burner parts (flame spreader and burner cap) are:
●
clean and dry
●
positioned correctly, as shown below.
●
For further advice, see sections ‘Care and cleaning’ and ‘Troubleshooting’.
Cleaning the ignitor and probe
Ignitor
Flame failure probe
Ignitor
Flame spreader
Burner cap
Burner parts Correct assembly
of burner parts
Incorrect assembly of
burner parts, resulting in
irregular flames
Loading ...
Loading ...
Loading ...