Loading ...
Loading ...
Loading ...
10
INSTALLATION INSTRUCTIONS
Gas connection with a flexible hose
●
If the gas is connected with a flexible hose, the connector on the wall should be
between 800-850mm above the floor and to a distance of at least 250mm outside the
width of the cooktop. The connector should be accessible with the cooktop installed.
●
Flexible hose assemblies should be AS/NZS 1869 Class B or Class D certified. The
thread connection shall be Rp ½” (ISO 7-1) female.
●
The hose assembly must be as short as practicable and comply with relevant AS 5601/
NZS 5261 requirements.
●
The hose must not be kinked, subjected to abrasion or permanently deformed.
●
The hose must not be near or in contact with any hot surfaces (eg base of metal
hotplate, flue or chassis of underbench oven etc).
Fibre washer
Elbow (1/2” BSP external thread)
Gas connection to the cooktop
Loading ...
Loading ...
Loading ...