Loading ...
Loading ...
Loading ...
Rinsing the circuits :
Press the maintenance and settings button fig.27. The function indicator is shown above the mainte-
nance button .
If necessary, using the navigation button, select the rinse symbol .
Press START , rinsing starts and finishes when the coffee menu appears.
Automatic rinsing of the circuits when the machine starts.
■ You can choose to program the machine to be rinsed automatically each time it is turned on. To do this,
press the maintenance and settings button fig.27. Using the navigation button , select the automatic
rinsing programming symbol . Press the button to choose ON which confirms this program. If you
press the , button, automatic rinsing is disabled.
■ You can return to the coffee types menu by pressing the button.
Warning: after this rinsing process, hot water will be released from the coffee outlet. Ensure that the drip
tray is in place even when the machine is not being used. The cycle lasts only a few seconds and stops au-
tomatically.
Cleaning program - total duration: approximately 13 minutes
You do not have to run the cleaning program as soon as the appliance requests it, but it must be done rea-
sonably soon after. If cleaning is postponed, the alert message will remain illuminated until the process is car-
ried out.
■ When the symbol lights up, you can run the automatic cleaning program by pressing the maintenance
and settings button . The symbol is selected. The function indicator is shown above the
maintenance button .
■
The automatic cleaning program is divided into 2 stages: the cleaning cycle itself, followed by the rinse cycle.
You can clean the machine at any time by pressing the maintenance and settings button then, using the
navigation button select the cleaning symbol .
■ To run this cleaning program, you will need a container which holds at least 20 oz and which can be placed
beneath the coffee outlet and the steam nozzle. The symbol flashes.
■ Lift the cup tray fig.28.
■ Insert the KRUPS cleaning tablet fig.29.
■ Fill the water container to its maximum level of 57 oz fig.2.
■ Empty the coffee grounds collector and the drip tray and clean the coffee drawer fig.23-24-25.
■ Put a 0.6 L (21 oz) container under the coffee and steam jets fig.30.
■ Press START . The symbol becomes constant. The first phase (approximately 10 minutes) begins.
When this phase has finished, empty the container and the drip dray. The symbol flashes. Put the parts
back in place.
■ Press START . The symbol becomes constant, the final phase (approximately 3 minutes) begins.
When this phase has finished, empty the container and the drip tray. The cycle has finished, the coffee
types menu appears.
Note: if you turn off or unplug your machine during cleaning or if there is a power failure, the cleaning program
will start from the beginning of the program once the power is restored to the appliance. It is not possible to
postpone this process. It is obligatory in order to rinse the water circuit. In this case, a new cleaning tablet
may be necessary. It is best to run the full cleaning program in order to avoid any risk of poisoning. The
cleaning cycle is irregular: do not put your hands under the coffee outlet while the cycle is running.
Descaling program - duration: approximately 20 minutes
You do not have to run the descaling program as soon as the appliance requests it, but it must be done rea-
sonably soon after. If descaling is postponed, the alert message will remain illuminated until the process is
carried out.
The amount of limescale collected depends on the hardness of your water.
Warning: if your product is fitted with our Claris - Aqua Filter System cartridge, remove the cartridge before
descaling.
30
Loading ...
Loading ...
Loading ...