Loading ...
Loading ...
Loading ...
Maintenance
35
Fig. 6.4- SP-24 Firmware Update Installation Dialog
You are now ready to upgrade the firmware within the SP-24 sound processor. Use
the following procedure to install the new firmware:
1. Make sure the SP-24 sound processor is connected to the PC and powered
on.
2. Launch the SP-24 Editor software, and establish a connection between the
PC and the hardware.
3. The Firmware update dialog contains the necessary instructions for placing
the SP-24 sound processor into firmware update mode. Follow the
instructions, and press ‘OK’.
Loading ...
Loading ...
Loading ...