Loading ...
Loading ...
AU
TO
When blending these common ingredients, order is everything. Use this visual
guide to ensure your recipes turn out smooth and delicious every time.
Loading
Instructions
Top off with ice or frozen ingredients.
Next add leafy greens and herbs.
Next add any dry or sticky ingredients.
Like seeds, powders, and nut butters.
Pour in liquid or yoghurt next.
For thinner results or a more juice-like drink,
add liquid as desired.
Start by adding fresh fruits and vegetables.
FOR BEST RESULTS:
- Cut ingredients into 2.5cm chunks.
- Do not fill the cup past the MAX fill line.
- If you feel resistance on the blade assembly when
fastening it to the cup, remove some ingredients.
- If blending soups or sauces, always ensure ingredients
are cooled to room temperature before blending.
Ninja cups are NOT intended for hot blending.
- Do not place frozen ingredients first in the Nutri Ninja
®
.
4 5
with Nutri Ninja
™
Cup
Quick Assembly
Turn cup upside down
and lower it onto the
base.
Turn cup clockwise
to lock in place.
When finished, turn
the cup upright and
unscrew to remove the
Pro Extractor Blades™
Assembly.
Screw on the blade
assembly clockwise until
you have a tight seal.
WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp. Contact with the
blades’ edges can result in laceration.
CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja cup upon completion of
blending. Do not store ingredients before or after blending them in the cup with the blade assembly attached.
Some foods may contain active ingredients or release gases that will expand if left in a sealed container,
resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup, use
only Sip & Seal Lid to cover.
1 32
NOTE: Programs applicable to the Nutri Ninja Cup will illuminate once it is locked onto the base.
Dishwasher: Containers, lids, and blade assemblies are all top-rack dishwasher safe. Ensure the
blade assembly is removed from the container before placing in the dishwasher.
Hand washing: Wash the containers, lids, blade assemblies in warm, soapy water. When washing
the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with
blades. Handle the blade assemblies with care to avoid contact with sharp edges. Rinse and air
dry thoroughly.
WARNING: Handle the blade assemblies with care when washing, as the blades are sharp. Contact with the
blades’ edges can result in laceration.
Cleaning Instructions
4
Loading ...
Loading ...
Loading ...