Loading ...
Loading ...
Loading ...
32 | English
external influences ((see "Checking accuracy and calibrating the inclination measure-
ment", page38), (see "Accuracy check of the distance measurement", page39)).
Switching On and Off
To switch on the measuring tool, briefly press the measuring button (1). When switching
on the measuring tool, the laser beam is not switched on.
To switch off the measuring tool, press and hold the measuring button (1).
If no physical or graphical button is pressed on the measuring tool for approx. five
minutes, the measuring tool will switch off automatically to save the batteries/re-
chargeable batteries. All stored values are retained when the tool is switched off.
Measuring process
Once switched on, the measuring tool is in the length measurement
function. Other measuring functions can be set by pressing the but-
ton (k) (see "Measuring functions", page34).
Once the measuring tool has been switched on, the rear edge of the
measuring tool is selected as the reference level for measurement.
You can change the reference level by pressing the button (e) (see
"Selecting the reference level (see figures A–C)", page33).
Apply the measuring tool with the selected reference level to the
point at which you want to start the measurement (e.g. wall).
To switch on the laser beam, briefly press the measuring button (1).
u Do not direct the laser beam at persons or animals and do not stare into the laser
beam yourself (even from a distance).
Aim the laser beam at the target surface. To initiate the measurement, briefly press the
measuring button (1) again.
In the continuous measurement function, measurement will begin after the first press of
the measuring button (1).
The measured value typically appears within 0.5 seconds and after no more than 4
seconds. The duration of the measurement depends on the distance, the lighting condi-
tions and the reflective properties of the target surface.
If no measurement has taken place approx. 20 seconds after sighting, the laser beam is
switched off automatically to save the batteries and the display is dimmed.
1 609 92A 4P1 | (17.01.2019) Bosch Power Tools
Loading ...
Loading ...
Loading ...