Humax FVP-4000T 1TB Freeview Play HD TV Recorder

User Manual - Page 23

For FVP-4000T.

PDF File Manual, 38 pages, Read Online | Download pdf file

FVP-4000T photo
Loading ...
Loading ...
Loading ...
GB24
Settings
PVR Settings
Press the HOME button. Select SETTINGS and then PVR Settings.
IP EPG
Set to On to enjoy advanced EPG services over the Internet.
Recording Options
Start Padding Time / End Padding Time: You can set the recording padding time to
add extra recording time to the start and end of all your scheduled recordings.
Note: The start and end times set will override the broadcast Accurate recording.
Auto Delete: Set to On to add old recordings to the list of TO BE DELETED.
Playback Options
Series Play: Set to On to play back all episodes of a programme successively.
Instant Replay Time: Select the replay time.
Skip Forward Time: Select the skip time.
Storage
You can check the capacity of each storage or format the storage when necessary.
Internal HDD: Run the HDD test or format the storage.
External Devices: To remove the storage, select Remove Storage Safely first.
Note: All data in the storage will be deleted after formatting.
System Settings
Press the HOME button. Select SETTINGS and then System Settings.
System Information
You can view the system information. Select CHECK NEW SOFTWARE to see if
new software is available.
Power Timer
You can set the time the product powers on or powers off.
Power Management
Automatic Power Down: Select On to enter standby mode automatically if
no user interaction occurs for 3 hours.
Power Saving in Standby: Select On to reduce the power consumption in
standby to below 0.5W.
Note:
A message will display 2 minutes before the product enters standby mode.
If you ignore this message, the product enters standby mode automatically.
When set to On the product will not supply the loop through aerial signal
to any connected device.
Factory Default
You can restore your receiver to factory settings.
Shortly after you complete the factory default, the installation wizard will
appear automatically.
Warning: Note that once you perform factory default, all user configured data will
be reset.
Loading ...
Loading ...
Loading ...