Loading ...
Loading ...
Loading ...
Foscam Inc
www.foscam.com [email protected]
6
After the above steps are completed standby for approximately 30 seconds before unplugging
the Ethernet cable from the camera. After unplugging the Ethernet cable the WIFI module in the
camera should take over and attempt to login to the WIFI network. The camera should reappear on
the Foscam app after a few minutes.
Unable to connect to video after unplug Ethernet cable? See this page
3. What can I do when camera’s wireless connection is unstable or
intermittent?
Multiple factors may cause a wireless device connection to be unstable, such as wireless
signal interference, walls, IP conflicts, device overload etc.
In order to have stable wireless connection, there are 8 precautions you may like to know:
1. Check the antenna of the camera is fixed well.
2. Take router and camera closer to get good signal, or swap location with working cameras.
3. Setup a static IP for camera to help it remain connected, refer step1 in this FAQ.
4. Disable UPnP on camera.
5. Please change the wireless channel on router to have a try, if possible.
6. Keep the camera away from other wireless networks, household appliances.
7. Check to make sure router is not overloaded, you can connect less device to have a test.
8. Shut off any 3rd party applications, as some will over-drive the camera, and cause reboot.
If camera issue persists after checked with above tips, you can message us on Amazon to get
warranty service.
4. What can I do when Foscam app failed to connect camera video
remotely?
Loading ...
Loading ...
Loading ...