Loading ...
Loading ...
Loading ...
Foscam Inc
www.foscam.com [email protected]
12
Install plugin for Windows OS
Install plugin for Mac OS
After install plugin, remember to allow it to run when browser pop up any options. Then enter the
username and password for the camera. If this is the first time the camera is being logged into the
default username is admin followed by a blank password.
During a first-time login situation, you will be prompted to enter a new username and password for the
camera. Be sure to notate this information somewhere for future reference.
13. How to setup to storage alarm recordings to a SD card?
Other than save recordings, Foscam cameras also support save recordings to FTP or SD card. To
setup camera save alarm recording to SD card when it detects a motion, please follow below steps.
Step 1: Setup of the Motion Detection Settings
1) Navigate to Settings → Alarm → Motion Detection
2) Check the checkbox by Enable
3) Check the checkbox by Recording for the alarm action
4) Set the Detection Area (the area the camera is monitoring for motion related events)
5) Set the Schedule that the camera will follow to monitor for motion detection events.
6) Click “Save” to save the configuration information to the camera.
Attention
：
The settings on Detect Area of
cameras C2/FI9900EP/FI9900P/FI9901EP/FI9961EP/R2/R4/FI9928P are different, you can set 3
different zooms for these cameras with different sensitivity please check the below picture:
Loading ...