Loading ...
Loading ...
Loading ...
10 11
SECTION 2 Controls & Indicators (LCD Control Center)
Setting the Clock
Setting the clock is optional. When the clock is set, the time will appear in
the LCD Control Center. NOTE: You must set the clock if you will be using the
Auto On/Off Time programming feature.
1.
Press the MENU Button.
2. The word ‘OFF’ will appear at the top of the
LCD Control Center to indicate that the
clock is not set (fig. 10). The programming
options will appear on the LCD Control
Center with a small arrow pointing to ‘SET
CLOCK’. “H” (Hour) will appear above the
Left Button and “M” (Minute) will appear
above the Right Button. The “H” and “M”
icons and Left and Right Buttons will flash.
3. Press or hold the Left Button under the
flashing “H” until you have reached the
appropriate hour. If the hour has passed 12
“PM” will be shown.
4. Press or hold the Right Button under the
flashing “M” to set the minutes.
5. When you have reached the correct time, press the MENU Button five
times to scroll through the remaining programming steps.
BREW TEMP
Set
Hours
Set
Minutes
MEN U
BRE W
MEN U
SET CLOCK
AUTO OFF
ONOFF TIME
BREW SIZE
MH
READY
NOT
fig.
10
6. The correct time should now be displayed in the LCD Control Center.
NOTE: If power is interrupted to the Brewer by unplugging it, or if power
is lost, follow the procedure above to reset the time as the clock will not be
visible until the time is set. Brew size setting is remembered and restored
automatically. All other settings will be restored automatically after clock
is set.
Programming On/Off Features
The Brewer provides three modes so that you can enjoy gourmet coffee, tea
or hot cocoa on your own schedule. By programming your Brewer to turn on
each morning, you will never have to wait for the Brewer to warm up to brew
a gourmet cup of coffee. It will take the Brewer approximately 4 minutes to
warm up from room temperate.
1. Leave it ON all the time. The Brewer can be left on all the time so that it is
always ready to brew a fresh cup of gourmet coffee, tea or hot cocoa. To
turn the Brewer off at any time, simply press and release the Power Switch.
(NOTE
:
Although the clock remains on, if set, you can not brew a cup of coffee,
tea or hot cocoa.)
Press and release the Power Switch again to restore
power to the Brewer. You will have to wait for the water to heat up before
the Brewer is ready to brew.
2. Set the Brewer to “AUTO OFF” following a specified period of time after the
last brew.
a. Press the MENU Button twice to program the Auto Off feature. The LCD
Control Center will now display the programming options with a small
arrow next to “SET AUTO OFF” (fig. 11).
Loading ...
Loading ...
Loading ...