Loading ...
Loading ...
Loading ...
©2018 Hestan Commercial Corporation
6
EN
LOCATION AND INSTALLATION
(continued)
COUNTERTOP
1) Chamfer all exposed edges of decorative laminate to prevent damage from chipping.
2) Radius corners of cutout and file to ensure smooth edges and prevent corner cracking.
3) Recommend 1/4”or 3/8” diameter drill in each corner.
4) For solid surface countertops, refer to countertop material manufacturer instructions.
SOLID SURFACE COUNTERTOPS
Important: For solid surface material
installations such as Surel™ and Corian®,
consult with solid surface manufacturer.
Apply heat reflective tape such as Scotch®
Aluminum Foil Tape #425 or #427 around the
cutout so that it folds over on the top and
sides.
DO NOT WRAP THE TAPE UNDERNEATH
THE COOKTOP.
Be sure the tape extends beyond the
outermost flange of the cooktop. All corners
should be covered with tape.
NEW INSTALLATIONS
For new installations, the
minimum cut-out size is
preferable.
Figure 7.
Solid Surface Protective Tape
Figure 8.
Cutout Requirements (1/2)
Cooktop
Size
A B C D
30” MIN 28 1/2 [72.4 cm]
MAX 29-1/2” [73.7 cm]
MIN 19-1/2” [49.5 cm]
MAX 19 5/8” [49.8 cm]
MIN 19-1/2” [49.5 cm]
MAX 19 5/8” [49.8 cm]
MIN 2”
[5.0 cm]
MIN 3 1/2”
[9.0 cm]
36” MIN 34 1/2” [87.6 cm]
[88.9 cm] MAX 35”
MIN 2”
[5.0 cm]
MIN 3 1/2”
[9.0 cm]
Loading ...
Loading ...
Loading ...