Loading ...
Loading ...
Loading ...
©2018 Hestan Commercial Corporation
20
EN
CONVERSION
(continued)
REPLACING ORIFICES ON STACKED BURNER (KGC 36)
1) Remove the grates and burner caps (A).
2) Remove gas spreader (B).
3) Loosen orifices (C) by turning 9/32” nut driver
counter-clockwise.
4) Install the orifices supplied with this appliance in
the appropriate burner. Each orifice has a number
stamped on the side, which identifies the orifice
diameter. (See Figure 23 for the orifices to use in
each burner position).
5) Turn clockwise to tighten. Tighten to a torque of
15 to 20 inch-lbs. [1.7-2.3 N-m].
6) Replace all parts following the reverse order.
7) Save the orifices removed from the appliance for
future use.
C
A
B
Figure 22.
Stacked Burner
1.3
1.5
1.75
0.54
1.45
0.54
1.75
0.75
0.37
1.10
0.85
0.5
0.72
0.94
1.5
1.3
0.85
0.5
.094
0.72
1.45
0.75
0.54
1.75
1.75
0.54
1.10
0.37
1.10
0.37
1.45
0.85
0.37
1.10
1.45
0.85
MAIN FLAME SIMMER
MAIN FLAME SIMMER
MAIN FLAME SIMMER
MAIN FLAME SIMMER
KGC 30 Orifices
KGC 36 Orifices
noisrevnoc PLGN
Figure 23.
Orifice Locations
Loading ...
Loading ...
Loading ...