Loading ...
Loading ...
Loading ...
Page 1905.17.17
Multi-functional Operating with Remote Control
Turning ON/OFF the appliance:
1. Ensure steps 1-3 in the “Main Power Switch” procedure are rst followed.
2. Press the “ ” remote button to turn on the ame, ember bed, and ceiling light
LEDs at the brightest level. The heater is in OFF status.
Changing LED options:
1. Ensure steps 1-2 or 1-3 in “Turning ON/OFF the appliance” are previously
followed.
2. Press the yellow “ ” button multiple times to cycle through 4 different brightness
levels and OFF for the yellow ame LEDs.
3. Press the blue “ ” button multiple times to cycle through 4 different brightness
levels and OFF for the blue ame LEDs.
4. Press the pink “ ” button multiple times to cycle through 4 different brightness
levels and OFF for the pink ame LEDs.
5. Press the “ ” button to turn on all ame colors, ember bed, and ceiling light
LEDs (at brightest level). If Pressed off and on again, LED setting will resume to
previous setting.
6. Press the “ ” button multiple times to cycle through the colors of red, green,
cool blue, pink, lake green, dark blue, snow white, and all-color automatic
circulation (each color changing after 30 seconds).
7. Press the “ ” button multiple times to cycle through 4 different brightness levels
and OFF for the ceiling light LEDs.
8. The “ ” button is not functional on this model.
9. Press the “ ” button, the heater is auto set to a room temperature of 25°C.
When the room temperature reaches 25°C, the heater will turn off; when room
temperature drops below 22°C, two sets of heaters turn on to 1500W; when room
temperature is in the range of 22-25°C, only one set of heater turns on at 750W.
10. Press the “ ” button, the heater turns on in LOW condition (750W).
11. Press the “ ” button, the heater turns on in HIGH condition (1500W).
Note: Steps 2-11 can be done independently.
Bluetooth Speaker Controls:
1. Press the “ “ button to turn on and off the Bluetooth speaker; press and hold for 3 seconds, the
speaker sound when Bluetooth activated.
2. To play music, pair your mobile or MP3 device with the bluetooth speaker according to the bluetooth
procedure on your device.
3. Adjust volume and control the audio on your device.
4. Press and hold the “ “ button for 3 seconds; the speaker will sound and bluetooth will deactivate. In
between turning on and off the Bluetooth needs to take 10 seconds to reset.
Blue tooth is optional for selected model:KDY50M/KDY60M/KDY72M/KDY88M.
Loading ...
Loading ...
Loading ...