Loading ...
Loading ...
Loading ...
Page 1105.17.17
Option 2 & 3: Recessing the Appliance Flush into the Wall
Due to the many different nish materials used on walls, it is highly recommended that you consult your local
builder before you install this appliance in the wall.
Select a location that is not prone to moisture and is located at least 36” (914mm) away from combustible
materials such as curtain drapes, furniture, bedding, paper etc.
1. Measure the appliance and create a rough in
with electrical.
2. Remove the trim, the Return extension kit (if
applied), and the front glass (refer to Pages
15-17 for instructions).
3. Hold the appliance up to ensure it will t into
the framing.
4. To fully recess the appliance into the wall:
A. Position and screw the side brackets
(shown in grey on Page 10) to the set of
holes closest to the front face of the rebox.
B. Use 16-24 screws (provided) to lock
appliance into wall from the side facing out.
C. Install the media and reinstall the front
glass and trim.
FRONT VIEW
NOTE: The slim design of our units allow
them to t in 2 x 4 framing up to 2 x 8 framing.
Loading ...
Loading ...
Loading ...